M-COTE GL (Alcohol Based Coating)

M-COTE GL A spirit based Graphite wash

Ready to use high refractory graphite wash is black coloured coatings produced from especially with graphite having fixed carbon in order to get smooth and clean surface finish. The coatings are recommended for use on green sand, silicate and oil bonded moulds & cores to get a smooth casting finish free from sand burn-on for Iron, Gray Iron and non –ferrous castings.

M-COTE GL is mainly used for oil-bond, green sand &CO2 cores and moulds.

  • Specific Gravity:-1.00-1.10gm/cc
  • Viscosity :-12-15 Secs.
  • Solid Contents :-30-32%

Remix the ready for use liquid homogeneously before use.
Apply by brush or spray on the mould or core surface and light off.
In case of large moulds or cores surface, it is ideal to apply product in smaller areas at a time followed by immediate light off.
Replace the lid of the container immediately after use.
Torch the coated surface after lighting off whenever necessary, in order to completely dry the coated surface.

  • Good casting finishes and reduced fettling costs.
  • Higher coverage.
  • Easily flammable and hence gives a hard coating surface.
  • No blistering, cracking or scaling on drying.
  • Good covering properties by any of the application methods.
  • Brushing, Dipping and Spraying.

Packing 20/30/50kgs.
Storage precaution Stored in a cool & dry place. Highly inflammable & should be kept away from flames.